|
Big-4 Compressor Model # |
Displacement # |
Approx. Ship Weight (Lbs.) |
|
@ 1750 RPM CFM |
@ 1455 RPM m3/hr |
|
255BHFNC, Non-Unloading High Temp |
55 |
79 |
760 |
|
306BHFNC, Non-Unloading High Temp |
62 |
88 |
770 |
|
357BHFNC, Non-Unloading High Temp |
74 |
105 |
780 |
|
405BHFNC, Non-Unloading High
Temp |
85 |
121 |
780 |
|
509BHFNC, Non-Unloading High
Temp |
96 |
136 |
800 |
|
611BHFNC, Non-Unloading High
Temp |
111 |
157 |
800 |
|
205BCFNC, Non-Unloading Med
Temp |
55 |
79 |
760 |
|
256BCFNC, Non-Unloading Med
Temp |
62 |
88 |
770 |
|
307BCFNC, Non-Unloading Med
Temp |
74 |
105 |
780 |
|
358BCFNC, Non-Unloading Med
Temp |
85 |
121 |
780 |
|
409BCFNC, Non-Unloading Med
Temp |
96 |
136 |
800 |
|
511BCFNC, Non-Unloading Med
Temp |
111 |
157 |
800 |
|
206BLFNC, Non-Unloading Low
Temp |
62 |
88 |
770 |
|
257BLFNC, Non-Unloading Low
Temp |
74 |
105 |
780 |
|
308BLFNC, Non-Unloading Low
Temp |
85 |
121 |
780 |
|
359BLFNC, Non-Unloading Low
Temp |
96 |
136 |
780 |
|
411BLFNC, Non-Unloading Low
Temp |
111 |
157 |
800 |
|
Includes suction and discharge service valves, and Texas
Instruments solid state motor protection module. All low
temperature compressors are equipped with an oil cooler,
desuperheating valve, and discharge temperature thermostat.
Must specify "Oil" or "No Oil". See Options/Accessories
below for part numbers.
-
Compressors are available with the following motors (XL
refers to across-the-line start, PW refers to port-wind
start).
-
a) Single Voltage three phase 60Hz: 200
(XL/PW); and 575 (XL/PW).
-
b) Dual Voltage three phase 60 Hz: 230
(XL/PW) / 460 (XL); and 220 (XL) / 380 (XL).
-
c) Single Voltage three phase 50 Hz: 220
(XL/PW); 400 (XL/PW); and 500 (XL/PW).
-
d) Dual Voltage three phase 50 Hz: 200
(XL/PW) / 400 (XL).
Compressors with unloaders are supplied with internal unloaders.
The unloader solenoids are shipped loose and need to be
installed. Must specify control voltage when ordering. |
